• display as grid Grid
  • display as list List

Heavy Duty - Foam for Perforated Insert
Heavy Duty - Foam for Perforated Insert
Foam to fit perforated insert 4" x 4" x 10" When used in conjunction with 40mm solvent tee's, cross tee's, and 90° bends to create your own size foam filtration pod.Ideal if you are making your own filter box and require fine filtration. Please note: This only includes the foam. The perforated insert shown in the image is sold separately.

5

£5.75
Heavy Duty Cap & O Ring
Heavy Duty Cap & O Ring
Heavy Duty Cap and "O" Ring to fit the "40mm nut connector" Screw this on to the 40mm nut connector to make a "watertight access stop end."
£2.49

Heavy Duty Solvent - Flanged Tank Connector (Flat)
Heavy Duty Solvent - Flanged Tank Connector (Flat)
Heavy Duty Solvent Weld - Flanged Tank Connector - Flat. These flanged tank connectors have self tapping stainless steel screws and are suitable for total immersion under water. Use these flanges to make a connection through the side wall of a pond or tank. Can be used with salt Flange Connector Applications Suitable for use with PVC Liner, Butyl Liner, EPDM Liners, Fibreglass, Plastic...
Heavy Duty Solvent Weld - 45° Swept Bend
Heavy Duty Solvent Weld - 45° Swept Bend
Heavy duty solvent "45° bend" for metric drainage pipe. Internal Diameter of each size fitting: 40mm 45° Bend - Has an ID of 43mm 50mm 45° Bend - Has an ID of 56mm 82mm 45° Bend - Has and ID of 82mm 110mm 45° Bend - Has an ID of 110mm

1


Heavy Duty Solvent Weld - 90° Knuckle Bend
Heavy Duty Solvent Weld - 90° Knuckle Bend
Heavy duty solvent "90° knuckle bend" for metric drainage pipe. Internal Diameter of each size fitting: 40mm Knuckle bend - Has an ID of 43mm 50mm knuckle bend - Has an ID of 56mm

3

Heavy Duty Solvent Weld - 90° Swept Bend
Heavy Duty Solvent Weld - 90° Swept Bend
Heavy duty solvent "90° swept bend" for metric drainage pipe. Internal Diameter of each size fitting: 40mm Swept bend - Has an ID of 43mm 50mm Swept bend - Has an ID of 56mm 82mm Swept bend - Has and ID of 82mm 110mm Swept bend - Has an ID of 110mm

3


Heavy Duty Solvent Weld - End Caps (Plain)
Heavy Duty Solvent Weld - End Caps (Plain)
Heavy duty solvent "Stop End" for metric drainage fittings. Please note these fittings are the same size as pipe and fit inside a socket connector, 90° bend, 45° bend or Tee. External Diameter of each size fitting: 40mm Stop end - Has an OD of 43mm 50mm Stop end - Has an OD of 56mm 82mm Stop end - Has and OD of 82mm 110mm Stop end - Has an OD of 110mm
Heavy Duty Solvent Weld - End Caps (Threaded)
Heavy Duty Solvent Weld - End Caps (Threaded)
Heavy duty solvent "Stop End Threaded" for metric drainage fittings. Please note these fittings are the same size as pipe and fit inside a socket connector, 90° bend, 45° bend or Tee. Threaded to allow access. External Diameter of each size fitting: 40mm Stop end threaded - Has an OD of 43mm 50mm Stop end threaded - Has an OD of 56mm 82mm Stop end threaded...

Heavy Duty Solvent Weld - Multi Adaptor
Heavy Duty Solvent Weld - Multi Adaptor
Heavy Duty Solvent Weld - Multi AdaptorThis is an amazing adaptor, with so many options available for you to use.1. Flexi Hose 50mm will fit over the hose tail.2. The inside of the hose end of the hose tail is 40mm solvent waste size.3. The inside of the solvent end has a 1½" female thread.4. The outside of the solvent end is 50mm solvent waste size.So many things to use this fitting for in and around...
£8.24
Heavy Duty Solvent Weld - Nut Connector
Heavy Duty Solvent Weld - Nut Connector
Heavy Duty Solvent Weld - Nut Connector Use this fitting to make a connection through a tank, pond liner, filter ect Use a "40mm cap and "O" ring" on the 40mm Nut Connector to turn this fitting in to a "40mm access stop end" Internal Diameter of each size fitting: 40mm Nut Connector - Has an ID of 43mm 50mm Swept bend - Has an ID of 56mm

5


Heavy Duty Solvent Weld - Pipe
Heavy Duty Solvent Weld - Pipe
Terrain Heavy Duty Solvent Weld - Pipe Having pioneered the development of solvent-welded systems, Terrain soil and waste products represent the industry benchmark for quality, installation flexibility and product innovation. Terrain systems include an extensive range of soil and waste drainage products for commercial, industrial, housing and public sector developments, all built on the strength...
Heavy Duty Solvent Weld - Pipe Bracket/Clip
Heavy Duty Solvent Weld - Pipe Bracket/Clip
Heavy Duty Solvent Weld - Pipe Clips These clips are designed to allow the easy fastening of "metric pipe" to walls or other surfaces. Available in the following sizes: 40mm 50mm 82mm 110mm

Heavy Duty Solvent Weld - Reducers
Heavy Duty Solvent Weld - Reducers
Heavy duty solvent "Reducer" for metric drainage fittings. These reducers are the same size as pipe and fill fit in to a socket connector, 90° bend, 45° bend and Tee. External Diameter of each size fitting: 40mm Reducer - Has an ID of 43mm 50mm Reducer - Has an ID of 56mm 82mm Reducer - Has and ID of 82mm 110mm Reducer - Has an ID of 110mm
Heavy Duty Solvent Weld - Socket Connector
Heavy Duty Solvent Weld - Socket Connector
Heavy duty solvent "socket connector" for metric drainage pipe. Internal Diameter of each size fitting: 40mm Socket connector - Has an ID of 43mm 50mm Socket connector - Has an ID of 56mm 82mm Socket connector - Has and ID of 82mm 110mm Socket connector - Has an ID of 110mm

Heavy Duty Solvent Weld - Socket/Male Thread
Heavy Duty Solvent Weld - Socket/Male Thread
Heavy duty solvent "Male Thread to Socket Connector" for metric drainage pipe. Internal Diameter of each size fitting: 40mm Male Thread to Socket Connector - Has an ID of 43mm 50mm Male Thread to Socket Connector - Has an ID of 56mm

3

Heavy Duty Solvent Weld - Tee Swept
Heavy Duty Solvent Weld - Tee Swept
Heavy duty solvent "Tee" for metric drainage pipe. Internal Diameter of each size fitting: 40mm Tee - Has an ID of 43mm 50mm Tee - Has an ID of 56mm 82mm Tee - Has and ID of 82mm 110mm Tee - Has an ID of 110mm

Heavy Duty Solvent Weld Cross Tee
Heavy Duty Solvent Weld Cross Tee
Heavy duty solvent Cross Tee for metric drainage pipe. Internal Diameter of each size fitting: 40mm Cross Tee - Has an ID of 43mm
£4.99
Heavy Duty Solvent Weld Perforated Insert
Heavy Duty Solvent Weld Perforated Insert
Heavy Duty Solvent Weld - Perforated Insert Perforated plastic insert to go into 4" x 4" x 10" foam When used in conjunction with 40mm solvent tee's, cross tee's, and 90° bends to create your own size foam filtration pod.Ideal if you are making your own filter box and require fine filtration. Please note: This only includes the perforated insert. The foam shown in the image is sold separately.
£3.59

Hosetails - Solvent Type A BLACK 40mm
Hosetails - Solvent Type A BLACK 40mm
40mm Solvent Hosetail These hosetails are used for attaching flexible hoses to solvent fittings. Type A BLACK - 40mm Solvent to Stepped Hose Connector ½", ¾", 1", 1¼" & 1½"

3

£2.85
Hosetails - Solvent Type B
Hosetails - Solvent Type B
40mm Solvent Hosetail - Clear These hosetails are used for attaching flexible hoses to solvent fittings. Type B Clear - 40mm Solvent to Stepped Hose Connector ½", ¾", 1", 1¼" & 1½" Ideal for use on waste outlets so you can see the dirty water leaving filter chambers, sump chambers ect.
£2.85

Hosetails - Threaded Nut
Hosetails - Threaded Nut
Female threaded nuts to fit the following male threaded hosetails. Type C Type D
Hosetails - Threaded Type C BLACK 25mm
Hosetails - Threaded Type C BLACK 25mm
Hosetail Stepped These hosetails are ideal for attaching flexible hoses to either solvent or threaded fittings. Type C BLACK - BSB Threaded 1" to Stepped Hose Connector ½", ¾", 1", 1¼" & 1½" Nut for thread turns this hosetail in to a "Stepped Hose Tank Connector" Use silicone to create a waterproof join when using the nut....
£2.85

Hosetails - Threaded Type D BLACK 32mm
Hosetails - Threaded Type D BLACK 32mm
Hosetail Stepped These hosetails are ideal for attaching flexible hoses to either solvent or threaded fittings. Type D BLACK - BSB Threaded 1¼" to Stepped Hose Connector ½", ¾", 1", 1¼" & 1½" Nut for thread turns this hosetail in to a "Stepped Hose Tank Connector" Use silicone to create a waterproof join when using...
£2.85
Rubber washer for Nut Connector
Rubber washer for Nut Connector
Rubber washer to fit Nut Connector Sizes available 40mm and 50mm

Solvent Weld - Female Threaded / Connector 40mm
Solvent Weld - Female Threaded / Connector 40mm
Heavy Duty Solvent Weld - 40mm Female Threaded / Connector This union fitting allows a demountable connection onto pumps uvs and other equipment with a 40mm male thread.

5

£3.49
Solvent Weld Flanged Tank Connector - Radial 110mm
Solvent Weld Flanged Tank Connector - Radial 110mm
Heavy Duty Solvent Weld - Flanged Tank Connector - Radial These radial flanged tank connectors have self tapping stainless steel screws and are suitable for total immersion under water. Can be used with salt These radial flanged Tank connectors are Ideal to use when connecting to circular tanks or vortexes, they suit tanks or vortexes of 3' or 4' in diameter. Pipe can be glued...

5

£10.95