Grid
List
PVC Imperial High Pressure - Socket Connector
PVC Imperial High Pressure - Socket Connector
Specification:
Imperial Socket Connector fits imperial pressure pipe
Glue to Glue - Both ends are plain.
Inside Diameters of the Imperial PVC Socket Connectors:
½" Straight - ID 20mm
¾" Straight - ID 27mm
1" Straight - ID 35mm
1½" Straight - ID 50mm
2" Straight - ID 60mm
3"...
PVC Imperial High Pressure - 90° Elbows
PVC Imperial High Pressure - 90° Elbows
Specification:
Imperial 90° Bend fits imperial pressure pipe
Glue to Glue - Both ends are plain.
PVC Imperial High Pressure - 45° Elbows
PVC High Pressure - 45° Bend
Specification
Imperial 45° Bend fits imperial pipe
PVC Imperial High Pressure - Tee
PVC Imperial High Pressure - Tee
Specification:
Imperial Tee with equal branch to fit imperial pressure pipe
Glue to Glue - all ends are plain
PVC Imperial High Pressure - 90° Swept Bend
PVC High Pressure - Swept 90° Bend - Long Radius
Specification:
Imperial Swept 90° Bend to fit imperial pipe.
Use this fitting to create less water drag, thus improving water flow and pump effeciency, this is essential when using more cost effective lower wattage pond pumps
PVC Imperial High Pressure - Reducers
PVC High Pressure - Reducers
Specification
Imperial solvent reducers which glue inside an imperial 90°, 45°, Socket, or Tee fitting
PVC Imperial High Pressure - End Caps
PVC High Pressure - End Caps
Specification
These end caps solvent over imperial pressure pipe
PVC Imperial - Female Threaded End Cap
PVC Imperial - Threaded End Cap
Female thread end cap - no washer, use ptfe tabe to seal.
PVC Imperial - Male Threaded End Cap
PVC Imperial - Male Threaded End Cap
Male thread end cap, use ptfe tape to seal.
PVC High Pressure - Metric to Imperial Adapter
PVC High Pressure - Metric to Imperial AdaptorThese are the very best quality PVC Pressure Fittings that accept up to 16bar pressureNoteKoi Logic only sells the very best quality PVC FittingsKoi Logic use these same PVC Pressure Fittings on all of the Koi ponds and filter systems we have.Best Price GuaranteeThe Best prices on the internet for PVC Pressure Fittings
PVC High Pressure - Socket Union Plain/Plain
PVC High Pressure - Socket Union Plain / Plain
Specifications:
Plain Solvent to Plain Solvent Union, Ideal for installing either side of equipment to allow easy removal without having to cut the pipe.
Colour:
Grey
PVC High Pressure - Socket Union Plain/Male
PVC High Pressure - Socket Union Plain / Male Thread
Specifications:
Male Thread to Plain Union, Ideal for installing equipment like pumps and Uvs
Colour:
Grey
PVC High Pressure - Socket Union Plain/Female
PVC High Pressure - Socket Union Plain / Female Thread
Specifications:
Plain Solvent to Female Thread Union, Ideal for using on equipment like pumps, Uvs ect
Colour:
Grey
PVC High Pressure - Socket/Threaded Nipple P/M
PVC High Pressure - Socket / Threaded Nipple
Specifications
Male Thread to Solvent Socket
PVC High Pressure - Barrel Nipple - Glue x Male Thread
PVC High Pressure - Barrel Nipple - Glue x Male Thread
Specifications
Solvent Spigot to Male Thread
PVC Imperial High Pressure - Threaded Back Nut
PVC Imperial High Pressure - Threaded Back Nut
PVC Imperial Threaded Backnuts are for applications that require you to create a seal against a pond wall, filter tank, growing on tank, quarantine tank or any flat surface where a tighter connection is needed.
Click here for a full range of sealers for use with these backnuts
PVC High Pressure - Spigot - Glue x Female Thread
PVC High Pressure - Solvent Spigot / Female Thread
Specifications
Solvent Spigot to Female Thread
Male Thread Hosetail - White 1½"
Hosetail - White 1½in Thread - 1½in Tail
PVC Imp Thread Reducer 2" -1½" - White
PVC High Pressure - Threaded Reducer - White
Specifications
2" External Male Thread with a 1.5" Internal Female Thread
PVC Imperial - Spigot Bulkhead/Nut Connector
PVC High Pressure - Spigot Bulkhead Connector
Specification:
One end spigot solvent the other end is male thread
Suitability
Imperial Threaded Bulkhead Connector for making connections through plastic/fibreglass tanks
PVC Imperial - Threaded Bulkhead/Nut Connector
PVC High Pressure - Threaded Bulkhead Connector
Specification:
Both ends of this fitting are Male threaded
Suitability
Imperial Threaded Bulkhead Connector for making connections through plastic/fibreglass tanks
PVC Imperial High Pressure - Flange Connector
PVC High Pressure - Imperial Flange Connector
Sizes Available
1.5"
2"
3"
4"
For use with imperial grey pressure pipe
Bottom Drain Pressure Pipe Adaptor
Bottom Drain Pressure Pipe Adaptor
110mm OD MALE GLUE to 4" ID FEMALE GLUE
This Bottom Drain converter can be used to convert a standard bottom drain with 110mm socket to a 4" socket.
PVC Imperial High Pressure Threaded 45° Elbows
PVC Imperial High Pressure Threaded 45° Elbow
Threaded both ends, - Not Solvent
Size:
1½"
2"
Solvent Reducing Bush
Solvent Reducer Bush
To convert from 50mm solvent metric pressure to 1½ solvent imperial pressure
To convert from 63mm solvent metric pressure to 50mm solvent heavy duty black waste
PVC Imperial High Pressure - Pipe
PVC Imperial High Pressure - Pipe
This is high quality PVC Imperial Pressure Pipe to use with the PVC Imperial Fittings.
Postage Long Length Surcharge Information
£7.99 - 1mtr Pipe per length
£19.99 - 2mtr Pipe per length
£19.99 - 3mtr Pipe cut in half. (you will recieve 2 x 1.5mtr)
Please note this is a non-returnable item.
PVC Imperial High Pressure - Pipe Clip
PVC High Pressure - Imperial Pipe ClipThese are the very best quality PVC Pressure Pipe Clips NoteKoi Logic only sells the very best quality PVC Pressure Pipe ClipsKoi Logic use these same PVC Pressure Pipe Clips on all of the Koi ponds and filter systems we have.Best Price GuaranteeThe Best prices on the internet for PVC Pressure Pipe Clips
Heavy Duty Solvent Weld - Socket Connector
Heavy duty solvent "socket connector" for metric drainage pipe.
Internal Diameter of each size fitting:
40mm Socket connector - Has an ID of 43mm
50mm Socket connector - Has an ID of 56mm
82mm Socket connector - Has and ID of 82mm
110mm Socket connector - Has an ID of 110mm
Heavy Duty Solvent Weld - 90° Swept Bend
Heavy duty solvent "90° swept bend" for metric drainage pipe.
Internal Diameter of each size fitting:
40mm Swept bend - Has an ID of 43mm
50mm Swept bend - Has an ID of 56mm
82mm Swept bend - Has and ID of 82mm
110mm Swept bend - Has an ID of 110mm
Heavy Duty Solvent Weld - 90° Knuckle Bend
Heavy duty solvent "90° knuckle bend" for metric drainage pipe.
Internal Diameter of each size fitting:
40mm Knuckle bend - Has an ID of 43mm
50mm knuckle bend - Has an ID of 56mm
Heavy Duty Solvent Weld - 45° Swept Bend
Heavy duty solvent "45° bend" for metric drainage pipe.
Internal Diameter of each size fitting:
40mm 45° Bend - Has an ID of 43mm
50mm 45° Bend - Has an ID of 56mm
82mm 45° Bend - Has and ID of 82mm
110mm 45° Bend - Has an ID of 110mm
Heavy Duty Solvent Weld - Tee Swept
Heavy duty solvent "Tee" for metric drainage pipe.
Internal Diameter of each size fitting:
40mm Tee - Has an ID of 43mm
50mm Tee - Has an ID of 56mm
82mm Tee - Has and ID of 82mm
110mm Tee - Has an ID of 110mm
Heavy Duty Solvent Weld - Reducers
Heavy duty solvent "Reducer" for metric drainage fittings.
These reducers are the same size as pipe and fill fit in to a socket connector, 90° bend, 45° bend and Tee.
External Diameter of each size fitting:
40mm Reducer - Has an ID of 43mm
50mm Reducer - Has an ID of 56mm
82mm Reducer - Has and ID of 82mm
110mm Reducer - Has an ID of 110mm
Heavy Duty Solvent Weld - Female Threaded / Connector 40mm
Heavy Duty Solvent Weld - 40mm Female Threaded / Connector
This union fitting allows a demountable connection onto pumps uvs and other equipment with a 40mm male thread.
Heavy Duty Solvent Weld - Socket/Male Thread
Heavy duty solvent "Male Thread to Socket Connector" for metric drainage pipe.
Internal Diameter of each size fitting:
40mm Male Thread to Socket Connector - Has an ID of 43mm
50mm Male Thread to Socket Connector - Has an ID of 56mm
Heavy Duty Solvent Weld - Nut Connector
Heavy Duty Solvent Weld - Nut Connector
Use this fitting to make a connection through a tank, pond liner, filter ect
Use a "40mm cap and "O" ring" on the 40mm Nut Connector to turn this fitting in to a "40mm access stop end"
Internal Diameter of each size fitting:
40mm Nut Connector - Has an ID of 43mm
50mm Swept bend - Has an ID of 56mm
Heavy Duty Cap & O Ring
Heavy Duty Cap and "O" Ring to fit the "40mm nut connector"
Screw this on to the 40mm nut connector to make a "watertight access stop end."
Rubber washer for Nut Connector
Rubber washer to fit Nut Connector
Sizes available 40mm and 50mm
Heavy Duty Solvent Weld - End Caps (Plain)
Heavy duty solvent "Stop End" for metric drainage fittings.
Please note these fittings are the same size as pipe and fit inside a socket connector, 90° bend, 45° bend or Tee.
External Diameter of each size fitting:
40mm Stop end - Has an OD of 43mm
50mm Stop end - Has an OD of 56mm
82mm Stop end - Has and OD of 82mm
110mm Stop end - Has an OD of 110mm
Heavy Duty Solvent Weld - End Caps (Threaded)
Heavy duty solvent "Stop End Threaded" for metric drainage fittings.
Please note these fittings are the same size as pipe and fit inside a socket connector, 90° bend, 45° bend or Tee.
Threaded to allow access.
External Diameter of each size fitting:
40mm Stop end threaded - Has an OD of 43mm
50mm Stop end threaded - Has an OD of 56mm
82mm Stop end threaded...
Heavy Duty Solvent - Flanged Tank Connector (Flat)
Heavy Duty Solvent Weld - Flanged Tank Connector - Flat.
These flanged tank connectors have self tapping stainless steel screws and are suitable for total immersion under water.
Use these flanges to make a connection through the side wall of a pond or tank.
Can be used with salt
Flange Connector Applications
Suitable for use with PVC Liner, Butyl Liner, EPDM Liners, Fibreglass, Plastic...
Solvent Weld Flanged Tank Connector - Radial 110mm
Heavy Duty Solvent Weld - Flanged Tank Connector - Radial
These radial flanged tank connectors have self tapping stainless steel screws and are suitable for total immersion under water.
Can be used with salt
These radial flanged Tank connectors are Ideal to use when connecting to circular tanks or vortexes, they suit tanks or vortexes of 3' or 4' in diameter. Pipe can be glued...
Heavy Duty Solvent Weld Cross Tee
Heavy duty solvent Cross Tee for metric drainage pipe.
Internal Diameter of each size fitting:
40mm Cross Tee - Has an ID of 43mm
Heavy Duty Solvent Weld Perforated Insert
Heavy Duty Solvent Weld - Perforated Insert
Perforated plastic insert to go into 4" x 4" x 10" foam
When used in conjunction with 40mm solvent tee's, cross tee's, and 90° bends to create your own size foam filtration pod.Ideal if you are making your own filter box and require fine filtration.
Please note: This only includes the perforated insert. The foam shown in the image is sold separately.
Heavy Duty Solvent Weld - Multi Adaptor
Heavy Duty Solvent Weld - Multi AdaptorThis is an amazing adaptor, with so many options available for you to use.1. Flexi Hose 50mm will fit over the hose tail.2. The inside of the hose end of the hose tail is 40mm solvent waste size.3. The inside of the solvent end has a 1½" female thread.4. The outside of the solvent end is 50mm solvent waste size.So many things to use this fitting for in and around...
Heavy Duty Solvent Weld - Pipe
Heavy Duty Solvent Weld - Pipe
This is high quality Solvent Waste Pipe to use with the Solvent Waste Fittings.
It is Important that you do not use the cheaper brown underground pipe, as that pipe can only be used with the rubber seals and cannot be glued, so it is not suitable for Koi Pond Plumbing and Construction
Postage Long Length Surcharge Information
£7.99 - 1mtr...
Heavy Duty Solvent Weld - Pipe Bracket/Clip
Heavy Duty Solvent Weld - Pipe Clips
These clips are designed to allow the easy fastening of "metric pipe" to walls or other surfaces.
Available in the following sizes:
40mm
50mm
82mm
110mm