• display as grid Grid
  • display as list List
Page: 1 | 2 | 3 |

PVC Imperial High Pressure - Socket Connector
PVC High Pressure - Socket Connector Specification: Imperial Socket Connector fits imperial pressure pipe Glue to Glue - Both ends are plain.
Was £2.09 Now from £1.49
PVC Imperial High Pressure - 90° Elbows
PVC Imperial High Pressure - 90° Elbows Specification: Imperial 90° Bend fits imperial pressure pipe Glue to Glue - Both ends are plain.
Was £2.69 Now from £1.99

PVC Imperial High Pressure - 45° Elbows
PVC Imperial High Pressure - 45° Elbows
PVC High Pressure - 45° Bend Specification Imperial 45° Bend fits imperial pipe
PVC Imperial High Pressure - Tee
PVC Imperial High Pressure - Tee Specification: Imperial Tee with equal branch to fit imperial pressure pipe Glue to Glue - all ends are plain
Was £2.49 Now from £1.99

PVC Imperial High Pressure - 90° Swept Bend
PVC High Pressure - Swept 90° Bend - Long Radius Specification: Imperial Swept 90° Bend to fit imperial pipe. Use this fitting to create less water drag, thus improving water flow and pump effeciency, this is essential when using more cost effective lower wattage pond pumps
Was £11.99 Now from £9.99
PVC Imperial High Pressure - Reducers
PVC Imperial High Pressure - Reducers
PVC High Pressure - Reducers Specification Imperial solvent reducers which glue inside an imperial 90°, 45°, Socket, or Tee fitting

PVC Imperial High Pressure - End Caps
PVC Imperial High Pressure - End Caps
PVC High Pressure - End Caps Specification These end caps solvent over imperial pressure pipe
no image available
PVC Imperial - Female Threaded End Cap
PVC Imperial - Threaded End Cap Female thread end cap - no washer, use ptfe tabe to seal.

no image available
PVC Imperial - Male Threaded End Cap
PVC Imperial - Male Threaded End Cap Male thread end cap, use ptfe tape to seal.
£4.99
PVC High Pressure - Metric to Imperial Adapter
PVC High Pressure - Metric to Imperial Adapter
PVC High Pressure - Metric to Imperial AdaptorThese are the very best quality PVC Pressure Fittings that accept up to 16bar pressureNoteKoi Logic only sells the very best quality PVC FittingsKoi Logic use these same PVC Pressure Fittings on all of the Koi ponds and filter systems we have.Best Price GuaranteeThe Best prices on the internet for PVC Pressure Fittings

PVC High Pressure - Socket Union Plain to Plain
PVC High Pressure - Socket Union Plain to Plain
PVC High Pressure - Socket Union Plain / Plain - White Specifications: Plain Solvent to Plain Solvent Union, Ideal for installing either side of equipment to allow easy removal without having to cut the pipe. Colour: White
PVC High Pressure - Socket Union Plain to Male
PVC High Pressure - Socket Union Plain to Male
PVC High Pressure - Socket Union Plain / Male Thread Specifications: Male Thread to Plain Union, Ideal for installing equipment like pumps and Uvs Colour: White

PVC High Pressure - Socket Union Plain to Female
PVC High Pressure - Socket Union Plain to Female
PVC High Pressure - Socket Union Plain / Female Thread Specifications: Female Thread to Plain Union, Ideal for installing equipment like pumps and Uvs Colour: White
PVC High Pressure - Socket Union Plain/Plain
PVC High Pressure - Socket Union Plain/Plain
PVC High Pressure - Socket Union Plain / Plain Specifications: Plain Solvent to Plain Solvent Union, Ideal for installing either side of equipment to allow easy removal without having to cut the pipe. Colour: Grey

PVC High Pressure - Socket Union Plain/Male
PVC High Pressure - Socket Union Plain/Male
PVC High Pressure - Socket Union Plain / Male Thread Specifications: Male Thread to Plain Union, Ideal for installing equipment like pumps and Uvs Colour: Grey
PVC High Pressure - Socket Union Plain/Female
PVC High Pressure - Socket Union Plain/Female
PVC High Pressure - Socket Union Plain / Female Thread Specifications: Plain Solvent to Female Thread Union, Ideal for using on equipment like pumps, Uvs ect Colour: Grey

PVC High Pressure - Socket/Threaded Nipple P/M
PVC High Pressure - Socket/Threaded Nipple P/M
PVC High Pressure - Socket / Threaded Nipple Specifications Male Thread to Solvent Socket
PVC High Pressure - Spigot - Glue x Male Thread
PVC High Pressure - Spigot - Glue x Male Thread
PVC High Pressure - Solvent Spigot / Threaded Nipple Specifications Solvent Spigot to Male Thread

PVC Imperial High Pressure - Threaded Back Nut
PVC Imperial High Pressure - Threaded Back Nut
PVC Imperial High Pressure - Threaded Back Nut PVC Imperial Threaded Backnuts are for applications that require you to create a seal against a pond wall, filter tank, growing on tank, quarantine tank or any flat surface where a tighter connection is needed. Click here for a full range of sealers for use with these backnuts
PVC High Pressure - Plain Socket/Female Thread

no image available
PVC High Pressure - Spigot - Glue x Female Thread
PVC High Pressure - Solvent Spigot / Female Thread Specifications Solvent Spigot to Female Thread
no image available
Male Thread Hosetail - White 1½"
Hosetail - White 1½in Thread - 1½in Tail
£3.95

PVC Imp Thread Reducer 2" -1½" - White
PVC Imp Thread Reducer 2" -1½" - White
PVC High Pressure - Threaded Reducer - White Specifications 2" External Male Thread with a 1.5" Internal Female Thread
£3.99
no image available
PVC Imperial - Spigot Bulkhead/Nut Connector
PVC High Pressure - Spigot Bulkhead Connector Specification: One end spigot solvent the other end is male thread Suitability Imperial Threaded Bulkhead Connector for making connections through plastic/fibreglass tanks

no image available
PVC Imperial - Threaded Bulkhead/Nut Connector
PVC High Pressure - Threaded Bulkhead Connector Specification: Both ends of this fitting are Male threaded Suitability Imperial Threaded Bulkhead Connector for making connections through plastic/fibreglass tanks
PVC Imperial High Pressure - Flange Connector
PVC Imperial High Pressure - Flange Connector
PVC High Pressure - Imperial Flange Connector Sizes Available 1.5" 2" 3" 4" For use with imperial grey pressure pipe

Bottom Drain Converter
Best Seller
Bottom Drain Converter
Bottom Drain - Converter 110mm - 4" This Bottom Drain converter can be used to convert a standard bottom drain with 110mm socket to a 4" socket.
£9.99
no image available
PVC Imperial High Pressure Threaded 45° Elbows
PVC Imperial High Pressure Threaded 45° Elbow Threaded both ends, - Not Solvent Size: 1½" 2"

no image available
Solvent Reducing Bush
Solvent Reducer Bush To convert from 50mm solvent metric pressure to 1½ solvent imperial pressure To convert from 63mm solvent metric pressure to 50mm solvent heavy duty black waste
PVC Imperial High Pressure - Pipe
PVC Imperial High Pressure - Pipe
PVC High Pressure - Pipe This is the very best quality PVC Pressure Pipe to use with the PVC Fittings. This PVC Pipe will accept up to 16bar pressure Koi Logic only sells the very best quality PVC Pipe Koi Logic use these same PVC Pressure Fittings and Pipe on all of the Koi ponds and filter systems we have. Best Price Guarantee The Best prices on the internet for PVC Pressure Fittings...

PVC Imperial High Pressure - Pipe Clip
PVC Imperial High Pressure - Pipe Clip
PVC High Pressure - Imperial Pipe ClipThese are the very best quality PVC Pressure Pipe Clips NoteKoi Logic only sells the very best quality PVC Pressure Pipe ClipsKoi Logic use these same PVC Pressure Pipe Clips on all of the Koi ponds and filter systems we have.Best Price GuaranteeThe Best prices on the internet for PVC Pressure Pipe Clips

5

Heavy Duty Solvent Weld - Socket Connector
Heavy Duty Solvent Weld - Socket Connector
Heavy duty solvent "socket connector" for metric drainage pipe. Internal Diameter of each size fitting: 40mm Socket connector - Has an ID of 43mm 50mm Socket connector - Has an ID of 56mm 82mm Socket connector - Has and ID of 82mm 110mm Socket connector - Has an ID of 110mm

Heavy Duty Solvent Weld - 90° Swept Bend
Heavy Duty Solvent Weld - 90° Swept Bend
Heavy duty solvent "90° swept bend" for metric drainage pipe. Internal Diameter of each size fitting: 40mm Swept bend - Has an ID of 43mm 50mm Swept bend - Has an ID of 56mm 82mm Swept bend - Has and ID of 82mm 110mm Swept bend - Has an ID of 110mm
Heavy Duty Solvent Weld - 90° Knuckle Bend
Heavy Duty Solvent Weld - 90° Knuckle Bend
Heavy duty solvent "90° knuckle bend" for metric drainage pipe. Internal Diameter of each size fitting: 40mm Knuckle bend - Has an ID of 43mm 50mm knuckle bend - Has an ID of 56mm

Heavy Duty Solvent Weld - 45° Swept Bend
Heavy Duty Solvent Weld - 45° Swept Bend
Heavy duty solvent "45° bend" for metric drainage pipe. Internal Diameter of each size fitting: 40mm 45° Bend - Has an ID of 43mm 50mm 45° Bend - Has an ID of 56mm 82mm 45° Bend - Has and ID of 82mm 110mm 45° Bend - Has an ID of 110mm
Heavy Duty Solvent Weld - Tee Swept
Heavy Duty Solvent Weld - Tee Swept
Heavy duty solvent "Tee" for metric drainage pipe. Internal Diameter of each size fitting: 40mm Tee - Has an ID of 43mm 50mm Tee - Has an ID of 56mm 82mm Tee - Has and ID of 82mm 110mm Tee - Has an ID of 110mm

Heavy Duty Solvent Weld - Reducers
Heavy Duty Solvent Weld - Reducers
Heavy duty solvent "Reducer" for metric drainage fittings. These reducers are the same size as pipe and fill fit in to a socket connector, 90° bend, 45° bend and Tee. External Diameter of each size fitting: 40mm Reducer - Has an ID of 43mm 50mm Reducer - Has an ID of 56mm 82mm Reducer - Has and ID of 82mm 110mm Reducer - Has an ID of 110mm
Heavy Duty Solvent Weld - Female Threaded / Connector 40mm
Heavy Duty Solvent Weld - Female Threaded / Connector 40mm
Heavy Duty Solvent Weld - 40mm Female Threaded / Connector This union fitting allows a demountable connection onto pumps uvs and other equipment with a 40mm male thread.

5

£3.49

Heavy Duty Solvent Weld - Socket/Male Thread
Heavy Duty Solvent Weld - Socket/Male Thread
Heavy duty solvent "Male Thread to Socket Connector" for metric drainage pipe. Internal Diameter of each size fitting: 40mm Male Thread to Socket Connector - Has an ID of 43mm 50mm Male Thread to Socket Connector - Has an ID of 56mm

3

Heavy Duty Solvent Weld - Nut Connector
Heavy Duty Solvent Weld - Nut Connector
Heavy Duty Solvent Weld - Nut Connector Use this fitting to make a connection through a tank, pond liner, filter ect Use a "40mm cap and "O" ring" on the 40mm Nut Connector to turn this fitting in to a "40mm access stop end" Internal Diameter of each size fitting: 40mm Nut Connector - Has an ID of 43mm 50mm Swept bend - Has an ID of 56mm

5


Heavy Duty Cap & O Ring
Heavy Duty Cap & O Ring
Heavy Duty Cap and "O" Ring to fit the "40mm nut connector" Screw this on to the 40mm nut connector to make a "watertight access stop end."
£2.49
Rubber washer for Nut Connector
Rubber washer for Nut Connector
Rubber washer to fit Nut Connector Sizes available 40mm and 50mm

Heavy Duty Solvent Weld - End Caps (Plain)
Heavy Duty Solvent Weld - End Caps (Plain)
Heavy duty solvent "Stop End" for metric drainage fittings. Please note these fittings are the same size as pipe and fit inside a socket connector, 90° bend, 45° bend or Tee. External Diameter of each size fitting: 40mm Stop end - Has an OD of 43mm 50mm Stop end - Has an OD of 56mm 82mm Stop end - Has and OD of 82mm 110mm Stop end - Has an OD of 110mm
Heavy Duty Solvent Weld - End Caps (Threaded)
Heavy Duty Solvent Weld - End Caps (Threaded)
Heavy duty solvent "Stop End Threaded" for metric drainage fittings. Please note these fittings are the same size as pipe and fit inside a socket connector, 90° bend, 45° bend or Tee. Threaded to allow access. External Diameter of each size fitting: 40mm Stop end threaded - Has an OD of 43mm 50mm Stop end threaded - Has an OD of 56mm 82mm Stop end threaded...

Heavy Duty Solvent - Flanged Tank Connector (Flat)
Heavy Duty Solvent - Flanged Tank Connector (Flat)
Heavy Duty Solvent Weld - Flanged Tank Connector - Flat. These flanged tank connectors have self tapping stainless steel screws and are suitable for total immersion under water. Use these flanges to make a connection through the side wall of a pond or tank. Can be used with salt Flange Connector Applications Suitable for use with PVC Liner, Butyl Liner, EPDM Liners, Fibreglass, Plastic...
Solvent Weld Flanged Tank Connector - Radial 110mm
Solvent Weld Flanged Tank Connector - Radial 110mm
Heavy Duty Solvent Weld - Flanged Tank Connector - Radial These radial flanged tank connectors have self tapping stainless steel screws and are suitable for total immersion under water. Can be used with salt These radial flanged Tank connectors are Ideal to use when connecting to circular tanks or vortexes, they suit tanks or vortexes of 3' or 4' in diameter. Pipe can be glued...

5

£10.95

Heavy Duty Solvent Weld Cross Tee
Heavy Duty Solvent Weld Cross Tee
Heavy duty solvent Cross Tee for metric drainage pipe. Internal Diameter of each size fitting: 40mm Cross Tee - Has an ID of 43mm
£4.99
Heavy Duty Solvent Weld Perforated Insert
Heavy Duty Solvent Weld Perforated Insert
Heavy Duty Solvent Weld - Perforated Insert Perforated plastic insert to go into 4" x 4" x 10" foam When used in conjunction with 40mm solvent tee's, cross tee's, and 90° bends to create your own size foam filtration pod.Ideal if you are making your own filter box and require fine filtration. Please note: This only includes the perforated insert. The foam shown in the image is sold separately.
£3.59
Page: 1 | 2 | 3 |