NT Labs Koi Care - Malachite

Product Description

NT Labs Koi Care - Malachite

Treats: 

Fungus caused by Saprolegnia.

When to use?
When fish have white growths on the body, head or fins, which may contain some green or brown discolouration. Malachite can be used in conjunction with Formaldehyde to treat fungal infections more effectively.

How to use?

• Test your water quality using NT Labs Test Kits.
• Mix the appropriate dosage in a clean bucket of pond water, pour evenly over the surface of the pond and leave for 7 days. Switch off UV filtration until treatment has been completed. Aerate the pond well during treatment.
• If you feel a repeat dose is necessary, check your diagnosis carefully using the Diagnosis Tool; a different medication may be more suitable. Allow 7 days and perform a partial water change before re-treating or treating with a different medication.
• Always treat when you have time to observe fish and take appropriate action in the unlikely event of a bad reaction.
• If required, mix with Formaldehyde prior to adding to the pond, following the instructions above.

Dose:

Apply NT Labs Koi Care Malachite at 10ml per 150 gallons (681 litres) of pond water. Can be repeated once every 7 days up to a maximum of 7 doses

• 250ml bottle treats 3750 gallons / 17050 litres
• 500ml bottle treats 7500 gallons / 34100 litres
• 1 Ltr bottle treats 15000 gallons / 68200 litres
• 2.5 Ltr bottle treats 37500 gallons / 170500 litres

Warning:
Do not use with orfe, rudd, tench or sturgeon/sterlet.
Do not use if the water temperature is above 30°C.
Do not use in hot, humid, thundery conditions.
Do not mix medications, other than combining with Koi Care Formaldehyde.

FAQs:
Q: How do I mix Formaldehyde & Malachite Green? A: If you are going to use these 2 products together then simply follow the instructions for each individual product, there is no need to adjust the dosage or to pre-mix the 2 treatments, you can simply apply one product followed by the other at the dosage on the instructions. Alternatively, for ease of use we would recommend using our pre-mixed F-M-G.

View other products in Fungus Treatments »