NT Labs Koi Care - Acriflavin

Product Description

NT Labs Koi Care - Acriflavin

Treats: 

Fin, tail & mouth rot and ulcers.

When to use?

When fish show symptoms of a bacterial infection, or as a quarantine solution before adding new fish.

Acriflavin can be used in conjunction with Ulcer Swab and Propolis Wound Seal for the treatment of ulcers and other open wounds.

How to use?

• Test your water quality using NT Labs Test Kits.
• Mix the appropriate dosage in a clean bucket of pond water, pour evenly over the surface of the pond and leave for 7 days. Switch off UV filtration until the colour has gone from the water. Aerate the pond well during treatment.
• If you feel a repeat dose is necessary, check your diagnosis using the Diagnosis Tool; a different medication may be more suitable. Allow 7 days after medicating and perform a partial water change before re- treating or treating with a different medication.
• Always treat when you have time to observe fish and take appropriate action in the unlikely event of a bad reaction.

Dosage: 

Add 10ml to every 80 gallons (364 litres) of pond water. Can be repeated once every 7 days up to a maximum of 7 doses.

• 250ml bottle treats 2000 gallons / 9100 litres
• 500ml bottle treats 4000 gallons / 18200 litres
• 1 Ltr bottle treats 8000 gallons / 36400 litres
• 2.5 Ltr bottle treats 20000 gallons / 91000 litres

Warning:
Do not use at water temperatures above 30°C.
Do not use in hot, humid or thundery weather.
Do not mix medications.

View other products in Bacterial Treatments »