|
|
|
Cloverleaf Answer Range Bundle
1 x Bacteria Answer 1 litre
1 x Oxygen Answer 1 litre
1 x Pond Support Answer 1 litre
1 x Sludge Answer 1 litre
1 x Blanket Answer 800g
|
|
|
Cloverleaf Bacteria Answer
Bacteria Answer is a unique blend of nitrifying bacteria to promote healthy filtration systems.
Nitrifying bacteria are vital for the establishment of a healthy balanced pond, and are a key contributor towards the development of a mature filtration system. Achieving such balance in a new fish pond is problematical, but Cloverleaf’s "Bacteria Answer" is the safe way to accelerate the process.
For new ponds, new filter systems, or sudden high fish loads, dosage with "Bacteria Answer" should be made twice a month for the first month, and once per month thereafter. For long term maintenance Cloverleaf’s "Pond Support Answer" is recommended.
Dosage of "Bacteria Answer"
Should be based on 200ml per 1000 litres of pond content, with the product mixed in 3 litres of pond water and applied with a watering can to the pond and filter system. UV clarifiers should be turned off for the first 24 hours of application.
|
|
|
Cloverleaf Oxygen Answer
Oxygen Answer is a unique blend of minerals to provide healthy oxygen levels, and can be a positive life saver at times when fish appear stressed.
Good levels of oxygen are vital for the health of fish, and equally as important for the wellbeing of beneficial bacteria which colonise filtration systems. Warm weather and ponds with many plants can be problematic. Often with fish mouthing at the pond surface. This is a danger sign., and "Oxygen Answer" is the safe answer to addressing this problem.
A wise pondkeeper should keep a bottle of Oxygen Answer in their emergency cupboard, especially to be at the ready when power strikes occur.
Dosage
1 litre bottle will treat ponds up to 33,000 litres (30ml treats 1000 litres).
|
|
|
cloverleaf Pond Support Answer
Pond Support Answer is a unique blend of beneficial bacteria for general pond management.
Beneficial bacteria play a key role in maintaining a healthy environment whilst contributing to the clarity of water. Cloverleaf’s "Pond Support Answer" provides the established pond with a biological enhancement and protects its essential balance.
Frequent use of "Pond Support Answer" will greatly assist in reducing single cell algae and thus will check the erosion of KH and fluctuations in ph levels.
For new ponds or the installation of new filtration systems Cloverleaf recommend the use of "Bacteria Answer"
The dosage of "Pond Support Answer"
Should be based on 100cc per 1000 litres of pond content, with the product mixed with 3 litres of pond water poured in the pond and filter system with a designated watering can. Apply once a month, or more frequently if cloudy water or algae exists. UV clarifiers should be turned off for the first 24 hours of application.
For instances where filamentous blanket weed exists it is recommended that a dose of Cloverleaf’s outstanding "Blanket Answer" is applied 10 days before using "Pond Support Answer"
1 litre bottle will treat ponds up to 10,000 litres (30ml treats 300 litres). For health & safety advice see bottom of page
|
|
|
Cloverleaf Sludge Answer
Sludge Answer is a unique blend of beneficial bacteria used to convert and remove sludge from the pond and filter system.
The accumulation of sludge within a pond or filter system means far more than just an ugly sight, such deposits not only erode important saturated oxygen levels ,but also become a breeding ground for pathogenic bacteria.
Using nature's natural range of bacteria ,Cloverleaf’s "Sludge Answer" is the safe way to biologically removing sludge and dead algae thus creating a cleaner pond and less filter maintenance, whilst promoting a sounder environment for the fish to enjoy.
"Sludge Answer" is designed for frequent use throughout the year on established ponds, however it is also a first class product when used on an immature pond, and will greatly assist with filter maturity.
For ponds with sludge problems, it is recommended that when applying "Sludge Answer" it should be supported with Cloverleaf’s "Oxygen Answer" - especially if the pond does not have a mechanical air pump of substance.
Dosage of Sludge Answer
For new or problematic ponds "Sludge Answer" should be added at the rate of 200cc per 1000 litres of pond water, with follow up doses (every 28 days or as required) at the rate of 100cc per 1000 litres. The product should be mixed with 3 litres of pond water, and poured over the pond surface and into the filter system using a watering can. (Note: Mark a watering can for "Pond Use" only). UV clarifiers should be turned off for the first 24 hours of application.
1 litre bottle will treat ponds up to 5,000 litres (30ml treats 150 litres).
|
displaying results 1 to 5 (of 5 items)
|
|
