|
|
|
MICROBE-LIFT AMMONIA REMOVER
Ammonia Remover neutralizes toxic ammonia, chloramines and chlorine. Is safe for everything that lives in the pond. Ammonia Remover gives beneficial bacteria time to multiply and recover if the biological filter gets damaged keeping pond fish from being
stressed. Use Ammonia Remover preferably after refreshing or adding tap water. Also use when the pond is over-populated with fish.
Every ounce removes 1.25 ppm of toxic ammonia by forming an irreversible complex to reduce free ammonia to safe levels
Neutralizes residual chlorine and destroys deadly chloramines
Treats ammonia burn in pond fish
This bottle treats ponds up to 20.000 litres
Fish transport Microbe-Lift / Ammonia Remover is very suitable when transporting fish (new ponds, koishows, transport) during the hot summer months. A few drops of Ammonia Remover per 4 litres in each transportation bag will support a safe transport.
Dosage:
Add 30 ml Ammonia Remover to 600 litres of water to decrease the level of ammonia with 1,25 mg/ltr. Treat for total ammonia level at one time.
If needed, the dosage may be repeated safely. If toxic levels of ammonia persist, a partial water change is recommended. Over feeding may be the cause.
|
|
|
MICROBE-LIFT CLEAN & CLEAR
Microbe-Lift Clean & Clear is a special blend of beneficial bacteria that keeps ponds clean & clear. Contains also photosynthetic bacteria and is grown in the bottle in which it is sold, thanks to a unique process! Photosynthetic bacteria can be very beneficial in balancing the ecology of a pond. They will compete with algae for their nutrition and sunlight.
When used according to dosage instructions it will provide the following benefits
PONDS
Keeps your ponds clean & clear
Seeds and maintains biological filters
Reduces ammonia nitrogen levels
Dissolves away organic sediment
Safe for fish & plants
FISH
Reduces environmental stress
Promotes rapid fish growth
Biologically supports a healthy immune system
Increases resistance to pathogens and parasites
Biodegrades uneaten food
PLANTS
Ensures a healthy start and reduces transplant shock
Stimulates root formation and growth
Improves tolerance to temperature fluctuations
Enhances the ability of plants to utilize light, water and nutrients by making the nutrients more bio available
|
| Size Of Pond (Litres) | 1st Application | Next 4 weeks (once a week) | Maintenance (once a month) |
| 300-750 | 250 ml | 60 ml | 60 ml |
| 751-2000 | 300 ml | 100 ml | 100 ml |
| 2001-4000 | 400 ml | 150 ml | 150 ml |
| 4001-20,000 | 500 ml | 200 ml | 200 ml |
| 20001-40,000 | 1000 ml | 500 ml | 500 ml |
| 40001-200,000 | 2000 ml | 1000 ml | 1000 ml |
| 200,001-400,000 | 4000 ml | 1500 ml | 1500 ml |
|
|
|
MICROBE-LIFT FILTERGEL
Microbe-Lift Filter Gel is a technological breakthrough because it's the first product that puts the bacteria right where you want it and it STAYS THERE! Filter Gel will quickly attach to and populate any filter media including foam, strapping, floss, bio-balls, ceramic media, etc. This will help to rapidly establish the necessary biological activity in your filter to stabilize your pond's environment quickly. It will also help restore this activity to your filter when you clean or change the media in your filter.
Easily applies to the filter pads/media without running or getting messy
Contains the same spectrum of bacteria found in MICROBE-LIFT/PL
Contains naturally occurring biopolymers, helping organisms quickly attach to the media
allowing for an 80% reduction in filter start-up time
Helps to stabilize pond environment quickly upon startup and to eliminate transient instability that can occur when filter media is cleaned or replaced
Allows for more frequent cleaning of filters without subsequent instability if a pond has a high solids loading where frequent cleaning is beneficial
Reduces the frequency of cleaning by accelerating the breakdown of organic solids that lead to high maintenance requirements
Helps to establish denitrification in the filter which can lower nitrate levels in the pond
Application:
Inoculate (spread) Filter GEL directly to filter pad or media. The Filter GEL will absorb into the pad/media by letting is set for 1 to 2 hours before inserting back into the filter or skimmer. After insertion, turn off recirculation pump for 1 to 2 hours, providing water can maintain adequate oxygenation without circulation for this amount of time.
Repeat application each cleaning/replacement of filter pads/media.
For normal maintenance use Mircrobe-Lift Clean & Clear.
|
|
|
MICROBE-LIFT FLOCCULANT PLUS - FOR CLEAR WATER
Microbe-Lift / Flocculant Plus is a proprietary formulation used to coagulate suspended solids in the pond water. After use, particles in the water settle to the bottom of the pond and/or filter out through the filter system.
Clears cloudy water
Safe for aquatic life and plants
Attracts suspended particles
Improves filtration
APPLICATION:
Add 30 ml (4 cups) per 550 litres of pond water. Maintain aeration and filtration for maximum clarification. After the milky haze period, conditions should clear within 12-24 hours.
Safe for fish and plants.
|
|
|
MICROBE-LIFT NITE OUT II - SPECIALLY FORMULATED FOR RAPID AMMONIA AND NITRITE REDUCTION
MICROBE-LIFT®/NITE-OUT II is designed specifically for pond waters that contain marine life. Its highly specialized microbial consortium of nitrifying cultures is specially formulated to eliminate ammonia via a natural biological process termed nitrification. Remains active to 4°C ! (Best results from 13°C and up).
The cultures contained in MICROBE-LIFT®/NITE-OUT II will establish, promote or stabilize and maintain nitrification in pond waters, eliminating the toxic effect of ammonia. MICROBE-LIFT®/NITE-OUT II liquid nitrifying bacteria contains select strains of Nitrosomonas, Nitrospira and Nitrobacter. Nitrosomonas convert ammonia to nitrite and Nitrobacter and Nitrospira convert nitrite to nitrate
Benefits
Initiates nitrification super fast!
Promotes stable nitrification.
Provides stable cold weather nitrification.
Safe for use around plants and animals.
|
| Size Of Pond (Litres) | 1st Application | Next 4 weeks (once a week) | Maintenance (once a month) |
| 300-2000 | 30 ml | 15 ml | 30 ml |
| 2000-4000 | 75 ml | 40 ml | 75 ml |
| 4000-10,000 | 150 ml | 75 ml | 150 ml |
| 10000-20,000 | 200 ml | 100 ml | 200 ml |
| 20,000-30,000 | 300 ml | 150 ml | 300 ml |
| 30,000-40,000 | 400 ml | 200 ml | 400 ml |
| 40,000-55,000 | 500 ml | 250 ml | 500 ml |
| 55,000-75,000 | 700 ml | 350 ml | 700 ml |
| 75,000-10,0000 | 800 ml | 400 ml | 800 ml |
|
|
|
MICROBE-LIFT NUTRIPACK
Like all living organisms, the beneficial micro-organisms in MICROBE-LIFT and other MICROBE-LIFT bacterial products needs minerals and essential trace elements in order to function optimally. While only required in very small amouns, if lacking, these micro nutrients can reduce the benefits you realise from any bacterial additives you use as well as any indigenous benefical micro-organisms in your pond.
MICROBE-LIFT Nutri-Pack contains the full complement of essential minierals and micro nutrients required by almost all beneficials micro-organisms, expecially nitrifying and denitrifying bacteria. By assuring that these beneficial micro-organisms ate not deficient in any essential minerals or conditions. MICROBE-LIFT Nutri-Pack does not contain bacterial cultures.
Will not harm plants or fish
Ready to use
Optimizes function of most beneficial bacteria, including nitrifying and denitrifying bacteria
Supplies co-factors that enhance activity of enzymes produced by micro-organisms
Non-toxic
Dosage:
Ponds up to 6 cubic metres (1320 gallons) 200ml a week
Ponds between 6 - 10 cubic metres (1320-2200 gallons) 35ml a week
Ponds between 10 - 100 cubic metres (2200-22,000 gallons) 25ml a week
|
|
|
MICROBE-LIFT pH DECREASER (PH-)
Formulated in deionized water
Includes 2 pH increasers for gentle effectiveness
Includes 3 electrolytes to help maintain osmotic balance
Contains a slime coat ingredient for skin protection and stress reduction in pond fish
Has a chelating agent to enhance water quality
Safely raises the pH level
Not harmful to fish or plants
Can temporarily blur the water, depending on the water quality
APPLICATION:
Test pond water the same time each day (dawn=lowest pH; dusk= highest pH) for a
pH reading ABOVE 8.5. Most ponds target at 7.5pH with an alkalinity level between 100-200 ppm (normal range). Add one ounce per 375 gallons of pond water for every 0.1 pH unit increase desired.
Apply MICROBE-LIFT pH DECREASE in several steps and measure increased pH before next addition. If your pond contains fish and/or plants, do not dramatically raise your pH levels more than 0.5 pH unit in a 24 hour period, as not to shock aquatic life and/or fish.
Example:
When you have a 3000 litres pond and you want to decrease the from 7,9 to 7,5, add 240 ml Decreaser. Use this product in multiple steps to prevent major pH oscillations.
|
|
|
MICROBE-LIFT pH INCREASE PLUS (PH+)
Formulated in deionized water
Includes 2 pH increasers for gentle effectiveness
Includes 3 electrolytes to help maintain osmotic balance
Contains a slime coat ingredient for skin protection and stress reduction in pond fish
Has a chelating agent to enhance water quality
Safely raises the pH level
Not harmful to fish or plants
Can temporarily blur the water, depending on the water quality
APPLICATION:
Test pond water the same time each day (dawn=lowest pH; dusk= highest pH) for a pH reading below 6.5. Most ponds target at 7.5pH with an alkalinity level between 100-200 ppm (normal range). Add one ounce per 375 gallons of pond water for every 0.1 pH unit increase desired. Apply MICROBE-LIFT pH INCREASE in several steps and measure increased pH before next addition. If your pond contains fish and/or plants, do not dramatically raise your pH levels more than 0.5 pH unit in a 24 hour period, as not to shock aquatic life and/or fish.
Example:
When you have a 3000 litres pond and you want to increase the pH from 7,1 to 7,5, add 240 ml Increase Plus
|
|
|
MICROBE-LIFT PHOSPHATE REMOVER
The ultimate remedy in phosphate removal for fresh water.
Use Microbe-Lift / Phosphate Remover for starting up a new pond. this guarantees low phosphate concentrations. To clear the pond from phosphate successfully, it is necessary to use Phosphate Remover regularly in new or existing “mature” ponds. MICROBEL-LIFT/ POND
PHOSPHATE REMOVER is a polymeric blend with outstanding qualities, including the ability to tie-up large quantities of phosphate without negatively influencing the pond water in any way. Phosphate- caused by the decomposition of organic substances such as food surpluses, dead plant matter, and excretion. Although phosphate is a vital part, it is only damaging in low concentrations.
A phosphate concentration increase could lead to water quality problems.
To solve problems caused by phosphate, it is recommended to keep the phosphate concentration in fresh water below 0,3 mg/ltr.
Safely removes the phosphate out of the pond water
Will not harm fish or plants
Application:
Use 30 ml Phosphate Remover per 400 litres of water. Depending on the water quality, the amount of organic- and fish waste, can remove between the 30 ml and 1 and 1,5 mg/ltr phosphate. The doses can be repeated if the phosphate level is still too high. Multiple treatments can be needed if a very high phosphate level is at hand.
This bottle treats up to 12000 litres of pond water.
|
|
|
MICROBE-LIFT SLUDGE AWAY - SLUDGE REMOVAL
Years in development, Microbe-Lift® Sludge Away speeds up the biological removal of slow to degrade organic waste matter from aquatic pond bottoms that may become toxic to fish and plant life. As organic solids accumulate on the pond bottom they begin to break down, releasing toxic gasses to the surrounding environment.
These gaseous byproducts endanger fish, marine life and plants. Microbe-Lift® Sludge Away removes bottom organic sludge and muck, reducing or eliminating the potential harmful gaseous compounds, and helps to clarify your pond water at the same time.
Especially helpful for ponds that have a rock or gravel bottom and where vacuuming is impractical. Works faster at warm water temperatures, however may be used effectively at any temperature year-round.
Provides “rapid & natural sludge and muck removal”.
80% faster than competitive products.
Reduces and binds phosphate.
Helps improve pond clarity.
100% active ingredients.
Disperses quickly.
Bio-degradable.
Dosage rates:
100 ml per 1250 litres of pond water.
First application:
100 ml per 1250 litres of pond water, then 100 ml per 1250 litres of pond water once a week for next 4 weeks.
Maintenance:
Treat with Microbe-Lift® Sludge Away monthly or as necessary thereafter
|
|
|
MICROBE-LIFT SPRING SUMMER CLEANER
MICROBE-LIFT SPRING/SUMMER CLEANER had been made especially to accelerate the deterioration of
leafs, small branches and other dead organic residue. Spring is the season to clean and revitalize your pond after the cold and hard winter months. A season procedure for a good organic balance in ponds.
The cellulase enzymes are the key to the deterioration of organic residue. It is very import to prevent waste build up on the bottom of your pond. The dead organic residue will turn to compost, which is an assault to your filter system and lowers the quality of your water.
Product Benefits
Helps to jump start your pond in the spring
Reduces buildup of dead leaves and residual organic sediment
Pre-measured, easy to handle and cost effective
Natural nontoxic and non caustic
Contents:
(8) 2 oz. water soluble packets (57 grams) of cellulose enzymes and hyper cellulose prod. bacteria
|
|
|
MICROBE-LIFT SUPER START - (BEAD)FILTER BACTERIA
Specially formulated for all biological (bead)filters. Like most types of mechanical/biological filters, beadfilters rely on the use of a media that provides a high surface area/volume ratio. This allows for support of the necessary amount of biomass, in the form of a biofilm, to properly remove organic and inorganic waste from the water.
Within the biofilm it is possible to carry out aerobic, facultative anaerobic, anaerobic and chemosynthetic processes. Microbe-Lift® Super Start contains all these bacteria capable of carrying out all of the necessary processes for optimum performance of bead filters.
When used according to dosage instructions Microbe-Lift® Super Start will provide the following benefits:
Rapid establishment of organic removal capabilities
Rapid establishment of nitrogen cycling including nitrification and denitrification
Reduced build-up of residue in the filter reducing maintenance and improving filter efficiency by reducing “channelling”
Breakdown of residual medications, like tea tree oils and formalin products which are inhibitory to most bacteria, after use
Rapid recovery of filter after use of medications and antibiotics
Effective over a wide pH range
Reduces ammonia nitrogen levels
Significantly reduces noxious odours caused by algae, fish waste and urine
Reduces hydrogen sulphide, which creates strong, offensive odours
DIRECTIONS:
When starting up the filter, apply Microbe-Lift® Super Start for 4 weeks. After cleaning the filter apply for 2 weeks. Use Microbe-Lift® Clean & Clear for maintenance.
|
| Size Of Pond (Litres) | Dosage |
| 300-750 | 60 ml |
| 751-2000 | 100 ml |
| 2001-4000 | 150 ml |
| 4001-20,000 | 200 ml |
| 20001-40,000 | 300 ml |
| 40001-80,000 | 500 ml |
| 80001-120,000 | 750 ml |
| 120001-160,000 | 1000 ml |
|
|
|
Microbe-Lift TheraP - Specially Formulated to Promote Fish Health
Microbe-Lift TheraP provides a natural pond eco-system, resulting in better overall fish health and improved water quality for use with all ornamental, coldwater, temperate, cyprinids, native and wild species.
It is easier to prevent disease than cure it, and good water quality is a keystone for disease control.
Reduces environmental stress
Promotes rapid fish growth
Beneficial when overpopulation exists
Compatible with all pond fish, wildlife and the other MICROBE-LIFT products
Safe for all animals in and around the pond
Nontoxic and nonpathogenic
Microbe-Lift TheraP a natural bacteria; it is NOT a genetically engineered or altered bacteria.
|
displaying results 1 to 13 (of 13 items)
|
|
