|
|
|
Bubble Bead Filters
BubbleBead filters feature patented technology and their proven loading rates are based on university research and many years of practical use in the aquaculture industries. The versatility of BubbleBead filters has made them a leading choice for new installations and upgrades to existing systems where high loading capability and good water clarity are paramount.
BUBBLEBEAD FILTER KEY FEATURES
Biological and mechanical filtration in one unit.
Sparkling water quality
Removes fine solids below 15 microns
Highly efficient breakdown of wastes Massive effective surface area of special bead media for biological activity
Over 600,000 beads per cubic foot
Patented backwash process Unique necked design ensures thorough wash and breaks up clumped beads Air-suction design - NO air blower required
Waste is drawn through the base outlet
Flushes wastes away in minutes
without upsetting biological activity
Compact and suited to remote siting No need to excavate
Ideal as a stand-alone filter or used to boost existing filtration Versatile units can be used alongside other equipment
Manual or automatic models to suit individual requirements All models feature the simple and time-saving backwash ('BubbleWash') procedure
Eight models available to match varying feed rates e.g. koi daily feed rates of 225 gm to 2 Kg*
pond volumes from under 4,000 litres to 100,000 litres
Bubble Bead - Model - BBF - 1.5
Manual or with Automatic Hydraulic Valve control of the backwash process.
Maximum head of the pump should be at least 2.0m more than the working head or exceed 4.0 meters whichever is the higher figure.
Size: 1.50m High and 0.59m Dia
Max Pond Vol (Light Stock): 3750 gls/17000 lts
Max Pond Vol (Med Stock): 2500 gls/11000 lts
Max Koi Load 1% Feed Rate: 34 kg
Max Feed Rate Per Day: 0.75 lb/340 gm
Max Rec Flow Rate: 1250 gph/5670 lph
Backwash: 70L
Recommended UV at standard stock volume in full sun: 30w
Note
The BBF - 1.5 manual has a single valve manual backwash control and can be sited above or below ground.
The BBF - 1.5 has a automatic hydraulic valve backwash control and must be sited above pond
|
|
|
Bubble Bead Filters
BubbleBead filters feature patented technology and their proven loading rates are based on university research and many years of practical use in the aquaculture industries. The versatility of BubbleBead filters has made them a leading choice for new installations and upgrades to existing systems where high loading capability and good water clarity are paramount.
BUBBLEBEAD FILTER KEY FEATURES
Biological and mechanical filtration in one unit.
Sparkling water quality
Removes fine solids below 15 microns
Highly efficient breakdown of wastes Massive effective surface area of special bead media for biological activity
Over 600,000 beads per cubic foot
Patented backwash process Unique necked design ensures thorough wash and breaks up clumped beads Air-suction design - NO air blower required
Waste is drawn through the base outlet
Flushes wastes away in minutes
without upsetting biological activity
Compact and suited to remote siting No need to excavate
Ideal as a stand-alone filter or used to boost existing filtration Versatile units can be used alongside other equipment
Manual or automatic models to suit individual requirements All models feature the simple and time-saving backwash ('BubbleWash') procedure
Eight models available to match varying feed rates e.g. koi daily feed rates of 225 gm to 2 Kg*
pond volumes from under 4,000 litres to 100,000 litres
Bubble Bead - Model - BBF - 3
Manual or with Automatic Hydraulic Valve control of the backwash process.
Maximum head of the pump should be at least 2.0m more than the working head or exceed 4.0 meters whichever is the higher figure.
Size: 1.70m High and 0.79m Dia
Max Pond Vol (Light Stock): 7500gls/34000 lts
Max Pond Vol (Med Stock): 5000 gls/22500 lts
Max Koi Load 1% Feed Rate: 65 kg
Max Feed Rate Per Day: 1.50 lb/650 gm
Max Rec Flow Rate: 2500 gph
Backwash: 210L
Recommended UV at standard stock volume in full sun: 55w
Note
The BBF - 3 manual has a single valve manual backwash control and can be sited above or below ground.
The BBF - 3 has a automatic hydraulic valve backwash control and must be sited above pond
|
|
|
Bubble Bead Filters
BubbleBead filters feature patented technology and their proven loading rates are based on university research and many years of practical use in the aquaculture industries. The versatility of BubbleBead filters has made them a leading choice for new installations and upgrades to existing systems where high loading capability and good water clarity are paramount.
BUBBLEBEAD FILTER KEY FEATURES
Biological and mechanical filtration in one unit.
Sparkling water quality
Removes fine solids below 15 microns
Highly efficient breakdown of wastes Massive effective surface area of special bead media for biological activity
Over 600,000 beads per cubic foot
Patented backwash process Unique necked design ensures thorough wash and breaks up clumped beads Air-suction design - NO air blower required
Waste is drawn through the base outlet
Flushes wastes away in minutes
without upsetting biological activity
Compact and suited to remote siting No need to excavate
Ideal as a stand-alone filter or used to boost existing filtration Versatile units can be used alongside other equipment
Manual or automatic models to suit individual requirements All models feature the simple and time-saving backwash ('BubbleWash') procedure
Eight models available to match varying feed rates e.g. koi daily feed rates of 225 gm to 2 Kg*
pond volumes from under 4,000 litres to 100,000 litres
Bubble Bead - Model - BBF - 5
Manual or with Automatic Hydraulic Valve control of the backwash process.
Maximum head of the pump should be at least 2.0m more than the working head or exceed 4.0 meters whichever is the higher figure.
When operating at maximum flow rates, at least 10% of the flow should bypass the filter and be directed back to the pond for circulation and aeration.
Size: 1.95m High and 0.79m Dia
Max Pond Vol (Light Stock): 12000gls/55000 lts
Max Pond Vol (Med Stock): 8000 gls/36000 lts
Max Koi Load 1% Feed Rate: 110 kg
Max Feed Rate Per Day: 1.50 lb/1.1kg
Max Rec Flow Rate: 4000 gph
Backwash: 280L
Recommended UV at standard stock volume in full sun: 2 x 55w
Note
The BBF - 5 manual has a single valve manual backwash control and can be sited above or below ground.
The BBF - 5 has a automatic hydraulic valve backwash control and must be sited above pond
|
|
|
Bubble Bead Filters
BubbleBead filters feature patented technology and their proven loading rates are based on university research and many years of practical use in the aquaculture industries. The versatility of BubbleBead filters has made them a leading choice for new installations and upgrades to existing systems where high loading capability and good water clarity are paramount.
BUBBLEBEAD FILTER KEY FEATURES
Biological and mechanical filtration in one unit.
Sparkling water quality
Removes fine solids below 15 microns
Highly efficient breakdown of wastes Massive effective surface area of special bead media for biological activity
Over 600,000 beads per cubic foot
Patented backwash process Unique necked design ensures thorough wash and breaks up clumped beads Air-suction design - NO air blower required
Waste is drawn through the base outlet
Flushes wastes away in minutes
without upsetting biological activity
Compact and suited to remote siting No need to excavate
Ideal as a stand-alone filter or used to boost existing filtration Versatile units can be used alongside other equipment
Manual or automatic models to suit individual requirements All models feature the simple and time-saving backwash ('BubbleWash') procedure
Eight models available to match varying feed rates e.g. koi daily feed rates of 225 gm to 2 Kg*
pond volumes from under 4,000 litres to 100,000 litres
Bubble Bead - Model - BBF - 7
Manual or with Automatic Hydraulic Valve control of the backwash process.
Maximum head of the pump should be at least 2.0m more than the working head or exceed 4.0 meters whichever is the higher figure.
When operating at maximum flow rates, at least 10% of the flow should bypass the filter and be directed back to the pond for circulation and aeration.
Size: 2.25m High and 0.79m Dia
Max Pond Vol (Light Stock): 16500gls/75000 lts
Max Pond Vol (Med Stock): 11000 gls/50000 lts
Max Koi Load 1% Feed Rate: 150 kg
Max Feed Rate Per Day: 3.50 lb/1.5kg
Max Rec Flow Rate: 5600 gph
Backwash: 340L
Recommended UV at standard stock volume in full sun: 3 x 55w
Note
The BBF - 7 manual has a single valve manual backwash control and can be sited above or below ground.
The BBF - 7 has a automatic hydraulic valve backwash control and must be sited above pond
|
|
|
Bubble Bead Filters
BubbleBead filters feature patented technology and their proven loading rates are based on university research and many years of practical use in the aquaculture industries. The versatility of BubbleBead filters has made them a leading choice for new installations and upgrades to existing systems where high loading capability and good water clarity are paramount.
BUBBLEBEAD FILTER KEY FEATURES
Biological and mechanical filtration in one unit.
Sparkling water quality
Removes fine solids below 15 microns
Highly efficient breakdown of wastes Massive effective surface area of special bead media for biological activity
Over 600,000 beads per cubic foot
Patented backwash process Unique necked design ensures thorough wash and breaks up clumped beads Air-suction design - NO air blower required
Waste is drawn through the base outlet
Flushes wastes away in minutes
without upsetting biological activity
Compact and suited to remote siting No need to excavate
Ideal as a stand-alone filter or used to boost existing filtration Versatile units can be used alongside other equipment
Manual or automatic models to suit individual requirements All models feature the simple and time-saving backwash ('BubbleWash') procedure
Eight models available to match varying feed rates e.g. koi daily feed rates of 225 gm to 2 Kg*
pond volumes from under 4,000 litres to 100,000 litres
Bubble Bead - Model - BBF - 9
Manual or with Automatic Hydraulic Valve control of the backwash process.
Maximum head of the pump should be at least 2.0m more than the working head or exceed 4.0 meters whichever is the higher figure.
When operating at maximum flow rates, at least 10% of the flow should bypass the filter and be directed back to the pond for circulation and aeration.
Size: 2.50m High and 0.79m Dia
Max Pond Vol (Light Stock): 22000gls/100000 lts
Max Pond Vol (Med Stock): 14500 gls/66000 lts
Max Koi Load 1% Feed Rate: 200 kg
Max Feed Rate Per Day: 4.50 lb/2.0kg
Max Rec Flow Rate: 7200 gph
Backwash: 400L
Recommended UV at standard stock volume in full sun: 4 x 55w
Note
The BBF - 9 manual has a single valve manual backwash control and can be sited above or below ground.
The BBF - 9 has a automatic hydraulic valve backwash control and must be sited above pond
|
|
|
Bubble Bead Filters
BubbleBead filters feature patented technology and their proven loading rates are based on university research and many years of practical use in the aquaculture industries. The versatility of BubbleBead filters has made them a leading choice for new installations and upgrades to existing systems where high loading capability and good water clarity are paramount.
BUBBLEBEAD FILTER KEY FEATURES
Biological and mechanical filtration in one unit.
Sparkling water quality
Removes fine solids below 15 microns
Highly efficient breakdown of wastes Massive effective surface area of special bead media for biological activity
Over 600,000 beads per cubic foot
Patented backwash process Unique necked design ensures thorough wash and breaks up clumped beads Air-suction design - NO air blower required
Waste is drawn through the base outlet
Flushes wastes away in minutes
without upsetting biological activity
Compact and suited to remote siting No need to excavate
Ideal as a stand-alone filter or used to boost existing filtration Versatile units can be used alongside other equipment
Manual or automatic models to suit individual requirements All models feature the simple and time-saving backwash ('BubbleWash') procedure
Eight models available to match varying feed rates e.g. koi daily feed rates of 225 gm to 2 Kg*
pond volumes from under 4,000 litres to 100,000 litres
Bubble Bead - Model - BBF - XS1
Single Valve Manual Control of the backwash process and suits sites above or below the adjacent pond level.
The max head of the pump should be at least 2m more than working head or exceed 4.0 meters whichever is the higher figure.
Size: 1.08m High and 0.41m Dia
Max Pond Vol (Light Stock): 2400 gls/11000 lts
Max Pond Vol (Med Stock): 1600 gls/7250 lts
Max Koi Load 1% Feed Rate: 50 lbs/23 kg
Max Feed Rate Per Day: 0.5 lb/230 gm
Max Rec Flow Rate: 800 gph/3600 lph
Backwash:45L
Recommended UV at standard stock volume in full sun: 25-30w
Note
The XS1 has a single valve manual backwash control and can be sited above or below ground.
|
|
|
Bubble Bead Filters
BubbleBead filters feature patented technology and their proven loading rates are based on university research and many years of practical use in the aquaculture industries. The versatility of BubbleBead filters has made them a leading choice for new installations and upgrades to existing systems where high loading capability and good water clarity are paramount.
BUBBLEBEAD FILTER KEY FEATURES
Biological and mechanical filtration in one unit.
Sparkling water quality
Removes fine solids below 15 microns
Highly efficient breakdown of wastes Massive effective surface area of special bead media for biological activity
Over 600,000 beads per cubic foot
Patented backwash process Unique necked design ensures thorough wash and breaks up clumped beads Air-suction design - NO air blower required
Waste is drawn through the base outlet
Flushes wastes away in minutes
without upsetting biological activity
Compact and suited to remote siting No need to excavate
Ideal as a stand-alone filter or used to boost existing filtration Versatile units can be used alongside other equipment
Manual or automatic models to suit individual requirements All models feature the simple and time-saving backwash ('BubbleWash') procedure
Eight models available to match varying feed rates e.g. koi daily feed rates of 225 gm to 2 Kg*
pond volumes from under 4,000 litres to 100,000 litres
Bubble Bead - Model - BBF - XS2
Single Valve Manual Control of the backwash process and suits sites above or below the adjacent pond level.
The max head of the pump should be at least 2m more than working head or exceed 4.0 meters whichever is the higher figure.
Size: 1.25m High and 0.50m Dia
Max Pond Vol (Light Stock): 4500gls/20000 lts
Max Pond Vol (Med Stock): 3000 gls/13500 lts
Max Koi Load 1% Feed Rate: 45 kg
Max Feed Rate Per Day: 1.0 lb/450 gm
Max Rec Flow Rate: 1000-1500 gph
Backwash: 95L
Recommended UV at standard stock volume in full sun: 30-55w
Note
The XS2 has a single valve manual backwash control and can be sited above or below ground.
|
|
|
Bubble Bead Filters
BubbleBead filters feature patented technology and their proven loading rates are based on university research and many years of practical use in the aquaculture industries. The versatility of BubbleBead filters has made them a leading choice for new installations and upgrades to existing systems where high loading capability and good water clarity are paramount.
BUBBLEBEAD FILTER KEY FEATURES
Biological and mechanical filtration in one unit.
Sparkling water quality
Removes fine solids below 15 microns
Highly efficient breakdown of wastes Massive effective surface area of special bead media for biological activity
Over 600,000 beads per cubic foot
Patented backwash process Unique necked design ensures thorough wash and breaks up clumped beads Air-suction design - NO air blower required
Waste is drawn through the base outlet
Flushes wastes away in minutes
without upsetting biological activity
Compact and suited to remote siting No need to excavate
Ideal as a stand-alone filter or used to boost existing filtration Versatile units can be used alongside other equipment
Manual or automatic models to suit individual requirements All models feature the simple and time-saving backwash ('BubbleWash') procedure
Eight models available to match varying feed rates e.g. koi daily feed rates of 225 gm to 2 Kg*
pond volumes from under 4,000 litres to 100,000 litres
Bubble Bead - Model - BBF - XS4
Single Valve Manual Control of the backwash process and suits sites above or below the adjacent pond level.
The max head of the pump should be at least 2.0m more than working head or exceed 4.0 meters whichever is the higher figure.
Size: 1.53m High and 0.66m Dia
Max Pond Vol (Light Stock): 9750gls/44000 lts
Max Pond Vol (Med Stock): 6500 gls/29000 lts
Max Koi Load 1% Feed Rate: 200lbs/90 kg
Max Feed Rate Per Day: 2.0 lb/900 gm
Max Rec Flow Rate: 3250 gph/ 14750 lph
Backwash: 170L
Recommended UV at standard stock volume in full sun: 2 x 55w
Note
The XS4 has a single valve manual backwash control and can be sited above or below ground.
|
|
|
MICROBE-LIFT SUPER START - (BEAD)FILTER BACTERIA
Specially formulated for all biological (bead)filters. Like most types of mechanical/biological filters, beadfilters rely on the use of a media that provides a high surface area/volume ratio. This allows for support of the necessary amount of biomass, in the form of a biofilm, to properly remove organic and inorganic waste from the water.
Within the biofilm it is possible to carry out aerobic, facultative anaerobic, anaerobic and chemosynthetic processes. Microbe-Lift® Super Start contains all these bacteria capable of carrying out all of the necessary processes for optimum performance of bead filters.
When used according to dosage instructions Microbe-Lift® Super Start will provide the following benefits:
Rapid establishment of organic removal capabilities
Rapid establishment of nitrogen cycling including nitrification and denitrification
Reduced build-up of residue in the filter reducing maintenance and improving filter efficiency by reducing “channelling”
Breakdown of residual medications, like tea tree oils and formalin products which are inhibitory to most bacteria, after use
Rapid recovery of filter after use of medications and antibiotics
Effective over a wide pH range
Reduces ammonia nitrogen levels
Significantly reduces noxious odours caused by algae, fish waste and urine
Reduces hydrogen sulphide, which creates strong, offensive odours
DIRECTIONS:
When starting up the filter, apply Microbe-Lift® Super Start for 4 weeks. After cleaning the filter apply for 2 weeks. Use Microbe-Lift® Clean & Clear for maintenance.
|
| Size Of Pond (Litres) | Dosage |
| 300-750 | 60 ml |
| 751-2000 | 100 ml |
| 2001-4000 | 150 ml |
| 4001-20,000 | 200 ml |
| 20001-40,000 | 300 ml |
| 40001-80,000 | 500 ml |
| 80001-120,000 | 750 ml |
| 120001-160,000 | 1000 ml |
|
displaying results 1 to 9 (of 9 items)
|
|
