|
|
|
Waterco Multi Cyclone
This revolutionary product has no moving parts to wear and no filter media to clean or replace.
The Multi Cyclone works on the basis of centrifugal water filtration.
Incoming water is guided by a diverter plate so that it enters multiple hydro cyclones tangentially, generating a strong centrifugal effect.
This spins the sediment out to the hydro cyclone's wall and then spirals it down to the sediment sump, while the cleansed water spirals upwards.
The accumulation of sediment can be visibly monitored through the MultiCylcone's clear sediment sump. The MultiCyclone is cleaned by simply opening its purge valve. Only 15 litres of water is discharged to clean the MultiCyclone of sediment.
The MultiCyclone is ideal as a pre-filter to extend the life of your excisting filter. The filtration efficiency of the MultiCyclone was tested by feeding 5 to 80 micron dust particles through the MultiCyclone and analyzing the percentage of dust particles trapped in the sediment bowl. The laboratory test revealed that the Multi Cyclone was effective in filtering particles sized 40 to 80 microns.
The unit works together with a sand, cartridge, bead or DE filter to polish the water. It allows the installation of finer filtration systems, such as cartridge filters with finer cartridges and the sand filters with finer filter media. The water ends up clearer with less up keep.
The unit is supplied with both 2"/63mm quick connect unions making this unit ideal for new installations and retrofit market. Minimum flow is 3m3/h, max. flow is 30m3/h. Max. pressure is 4 bar.
Easy to install Multicyclone is easy to install and fits to most existing pool filtration systems. The MultiCyclone can be easily retrofitted between the pump and existing filter.
Minimal Maintenance There are no moving parts to wear out and replace, no filter media to clean or replace.
Note
We recommend buying the stand for this unit.
The MultiCyclone must be installed after the pump.
|
displaying results 1 to 1 (of 1 items)
|
|
